Book of Boba fett Helmet Decals These are printed with industrial UV Printers on film free water slide backings, this includes x1 Decal set as pictured, there are a few spares of the smaller designs on the sheet incase you need to make a second or third attempt
the pink film you see is the removable film worry not the design is Black & white as it should be, We will produce a short video soon but for now follow the steps below:
- Step 1: cut our the decal roughly
- Step 2: submerge the decal in water until it separates from the backing
- Step 3: apply a decal fixative to the part and slide the decal onto the part
- Step 4: use a brush or soft tool to push all the water from behind the decal
- Step 5: use a hot air gun or hairdryer over the film for 3-4 mins (if applying the parts to metal you can also place the parts in the oven at 100-120C or 210-250F for 10-20 mins)
- Step 6: gently peal the translucent film from the decal and marvel at you application!
- Step 7: seal with your prefered clear coat/laquer as you would normally when finishing a decal
